All components recycle, independent of each other, up to the mixing head CMCHP14L2C40 in a special execution complete with two independent pouring pistons, each combined with two injectors.All components recycle, independent of each other, up to the mixing head CMCHP14L2C40 in a special execution complete with two independent pouring pistons, each combined with two injectors.The high pressure head CMCHP14L2C40 proposed is self-cleaning, with mixing chamber that does not need any type of washing at the end of casting, small external dimensions.The polyol not in use recycles in low pressure directly into the machine.The management of the three components is carried out through a dedicated software.The advantages, compared to traditional machines, are innumerable, such as the savings in washing time of the component lines, the loss of material during color change and last but not least the stability of the color used.The component tanks, complete with interspaces and the lines that feed the mixing head, are fitted with drain valves to allow total removal of the component to be replaced.Thanks to the touchscreen, equipped with extremely simple graphic software, machine programming is also accessible to less experienced personnel.To guarantee a constant injection rate, the foaming machine is equipped with axial piston pumps and high-resolution flow controllers.